Click image to view full size image
Overhead Transmission Line 4/0 AWG Bare Aluminum Conductor AAC
Specifications
Overhead Transmission Line 4/0 AWG Bare Aluminum Conductor AAC
1.18 years factory product
2.good feature
3.delivery fast
ACSR,AAC,AAAC,ASCSR&ACAR conductor widely used in power transmission lines with various voltage levels.
(1) all aluminum conductor (AAC)
(2) all aluminum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminum conductor aluminum clad steel reinforced(ACSR/AW)
(6)rear earth aluminum conductor steel reinforced(ACSR/RE)
(7)aluminum conductor aluminum alloy reinforced(ACAR)
AAC, All Aluminum Stranded Conductor
For use in overhead transmission and distribution systems and as bus connections in substations and switchyards. Solid conductors used for mechanical and grounding applications. Classes AA and A are used primarily for overhead transmission and primary and secondary distribution,where capacity must be maintained, a lighter conductor(compared to ACSR)is desired. Classes B and C are used primarily as bus, apparat us connector sand jumpers, where additional flexibility is required.
1.aluminum stranded conductor
2.overhead AAC Wire
3.medium breaking load
4.bare Al wire
1.Application
1)Classes AA and A are used primarily for overhead transmission and primary and secondary distribution, where capacity must be maintained and a lighter conductor (compared to ACSR) is desired, and when conductor strength is not a critical factor. Classes B and C are used primarily as bus, apparatus connectors and jumpers, where additional flexibility is required.
2)Classes refer to stranding and are an indication of relative conductor flexibility, AA being the least flexible,
3) the most flexible.
2.Specification
AAC bare conductor meets or exceeds the following international specifications:
B230 Aluminum 1350-H19 Wire for Electrical Purposes.
B231 Concentric-Lay-Stranded Aluminum 1350 Conductors.
GB1179-83 Chinese National Standard
IEC 60189 Round Wire Concentric Lay Overhead Electrical Stranded Conductor
BS215-1 Aluminum Conductors and Aluminum Conductors Steel Reinforced
DIN48201 Aluminum Conductors
3.Construction
Aluminum 1350-H19 wires, concentrically stranded.
4.Standards
ASTM-B232 Standard specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
BS215-2 aluminum conductors steel-reinforced -For overhead power transmission
DIN48204 Steel reinforced aluminum stranded conductors
IEC209 Aluminum stranded conductor steel reinforced
Customized type available.
AAC Technical Date Based on Standard DIN 48201 / DIN EN50182
AAAC Conductor
Are made out from aluminum-magnesium-silicon alloy of high electrical conductivity (min 53% IACS) containing magnesium (0.6-0.9%) & silicon (0.5-0.9%) to give it better mechanical properties after treatment. AAAC conductors are made out of aluminum alloy 6201. AAAC conductor has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR conductor on equal diameter basis.
Standards:
ASTM-B232 Standard specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
BS215-2 aluminum conductors steel-reinforced -For overhead power transmission
DIN48204 Steel reinforced aluminum stranded conductors
IEC209 Aluminum stranded conductor steel reinforced
Customized type available.
AAAC Technical Characteristics Based on Standard BS 3242
Specifications
Overhead Transmission Line 4/0 AWG Bare Aluminum Conductor AAC
1.18 years factory product
2.good feature
3.delivery fast
ACSR,AAC,AAAC,ASCSR&ACAR conductor widely used in power transmission lines with various voltage levels.
(1) all aluminum conductor (AAC)
(2) all aluminum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminum conductor aluminum clad steel reinforced(ACSR/AW)
(6)rear earth aluminum conductor steel reinforced(ACSR/RE)
(7)aluminum conductor aluminum alloy reinforced(ACAR)
AAC, All Aluminum Stranded Conductor
For use in overhead transmission and distribution systems and as bus connections in substations and switchyards. Solid conductors used for mechanical and grounding applications. Classes AA and A are used primarily for overhead transmission and primary and secondary distribution,where capacity must be maintained, a lighter conductor(compared to ACSR)is desired. Classes B and C are used primarily as bus, apparat us connector sand jumpers, where additional flexibility is required.
1.aluminum stranded conductor
2.overhead AAC Wire
3.medium breaking load
4.bare Al wire
1.Application
1)Classes AA and A are used primarily for overhead transmission and primary and secondary distribution, where capacity must be maintained and a lighter conductor (compared to ACSR) is desired, and when conductor strength is not a critical factor. Classes B and C are used primarily as bus, apparatus connectors and jumpers, where additional flexibility is required.
2)Classes refer to stranding and are an indication of relative conductor flexibility, AA being the least flexible,
3) the most flexible.
2.Specification
AAC bare conductor meets or exceeds the following international specifications:
B230 Aluminum 1350-H19 Wire for Electrical Purposes.
B231 Concentric-Lay-Stranded Aluminum 1350 Conductors.
GB1179-83 Chinese National Standard
IEC 60189 Round Wire Concentric Lay Overhead Electrical Stranded Conductor
BS215-1 Aluminum Conductors and Aluminum Conductors Steel Reinforced
DIN48201 Aluminum Conductors
3.Construction
Aluminum 1350-H19 wires, concentrically stranded.
4.Standards
ASTM-B232 Standard specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
BS215-2 aluminum conductors steel-reinforced -For overhead power transmission
DIN48204 Steel reinforced aluminum stranded conductors
IEC209 Aluminum stranded conductor steel reinforced
Customized type available.
AAC Technical Date Based on Standard DIN 48201 / DIN EN50182
| Code number | Area | Number of wires | Wire diameter | Conductor diameter | Linear mass | Rated strength | D.C. resistance at 20oC |
| mm2 | No. | mm | mm | kg/km | kN | Ω/km | |
| 16 | 15.9 | 7 | 1.7 | 5.1 | 43.4 | 3.02 | 1.7986 |
| 25 | 24.2 | 7 | 2.1 | 6.3 | 66.3 | 4.36 | 1.1787 |
| 35 | 34.4 | 7 | 2.5 | 7.5 | 93.9 | 6.01 | 0.8317 |
| 50 | 49.5 | 7 | 3 | 9 | 135.2 | 8.41 | 0.5776 |
| 50 | 48.3 | 19 | 1.8 | 9 | 132.9 | 8.94 | 0.5944 |
| 70 | 65.8 | 19 | 2.1 | 10.5 | 180.9 | 11.85 | 0.4367 |
| 95 | 93.3 | 19 | 2.5 | 12.5 | 256.3 | 16.32 | 0.3081 |
| 120 | 117 | 19 | 2.8 | 14 | 321.5 | 19.89 | 0.2456 |
| 150 | 147.1 | 37 | 2.25 | 15.8 | 405.7 | 26.48 | 0.196 |
| 185 | 181.6 | 37 | 2.5 | 17.5 | 500.9 | 31.78 | 0.1588 |
| 240 | 242.5 | 61 | 2.25 | 20.3 | 671.1 | 43.66 | 0.1193 |
| 300 | 299.4 | 61 | 2.5 | 22.5 | 828.5 | 52.4 | 0.0966 |
AAAC Conductor
Are made out from aluminum-magnesium-silicon alloy of high electrical conductivity (min 53% IACS) containing magnesium (0.6-0.9%) & silicon (0.5-0.9%) to give it better mechanical properties after treatment. AAAC conductors are made out of aluminum alloy 6201. AAAC conductor has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR conductor on equal diameter basis.
Standards:
ASTM-B232 Standard specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
BS215-2 aluminum conductors steel-reinforced -For overhead power transmission
DIN48204 Steel reinforced aluminum stranded conductors
IEC209 Aluminum stranded conductor steel reinforced
Customized type available.
AAAC Technical Characteristics Based on Standard BS 3242
| Code name | Nominal aluminum area | Stranding and wire diameter | Sectional area | Approx. overall diameter | Approx. mass |
Calculated D.C. Resistance at 20oC |
Calculated breaking load |
| mm2 | No./mm | mm2 | mm | kg/km | Ω/km | kN | |
| ALMOND | 25 | 7/2.34 | 30.1 | 7.02 | 82 | 1.094 | 8.44 |
| CEDAR | 30 | 7/2.54 | 35.47 | 7.62 | 97 | 0.9281 | 9.94 |
| FIR | 40 | 7/2.95 | 47.84 | 8.85 | 131 | 0.688 | 13.4 |
| HAZEL | 50 | 7/3.30 | 59.87 | 9.9 | 164 | 0.5498 | 16.8 |
| OAK | 100 | 7/4.65 | 118.9 | 13.95 | 325 | 0.2769 | 33.3 |
| ASH | 150 | 19/3.48 | 180.7 | 17.4 | 497 | 0.183 | 50.65 |
| ELM | 175 | 19/3.76 | 211 | 18.8 | 580 | 0.1568 | 59.1 |
| UPAS | 300 | 37/3.53 | 362.1 | 24.71 | 997 | 0.09155 | 101.5 |
Company Information
Luoyang Asian Sun Industrial Group Co., Ltd, a professional wires and cables manufacturer for 6 years in China. Asian Sun attends International Exhibitions every year, we support to offer many kinds of wires and cables, such as xlpe/pvc electrical cable, control cable, aerial cable, ABC, AAC, AAAC, ASCR cables, and XLPO/PVC Solar PV Cable etc.
1. Factory: 200,081 square meters, available for OEM;
2. Lead time: 5-7 working days after payment received;
3. Authentication: TUV, ;
4. Payment terms: T/T, L/C;
5. Guarantee: 17 years;
6. QC inspection: Strict inspection before delivery;
After-sales Service:
1. All our cables will be tested well in production and before delivery.
2. Please contact us if any problem, we will respond within 24 hours.
Specificationssolar cable 1, IEC, ASTM, DIN, BS VDE, UL, GOST,SAS standard.
2,TUV, ISO, CCC, CQC certification approved. 8 Years Experience of OEM